通過這些規定的保養，能及時發現焦化發電機組是否存在聲音異常、動作異常、外觀異常、溫度異常、壓力異常和氣味異常等故障現象，從而及時對機組進行檢查和調整，進而有針對性的加以解決，確保焦化發電機運行在狀態。下面來詳細講講。

Through these specified maintenance, it is possible to timely find out whether the coking generator unit has faults such as abnormal sound, abnormal action, abnormal appearance, abnormal temperature, abnormal pressure and abnormal smell, so as to timely check and adjust the unit, and then solve the problems in a targeted way to ensure that the coking generator is operating in a state. Let's talk about it in detail.

維護發電機通常是一個關鍵的組成部分。每臺機器都需要維護以增加機器的生命周期。在某些情況下，大多數發電機需要每月進行簡單的目視檢查。另一些則需要每兩年維護一次的特定步驟。并且一些發電機需要在兩年到一年的范圍內進行維護。

Maintenance of the generator is usually a critical component. Each machine needs maintenance to increase its life cycle. In some cases, most generators require a simple visual inspection every month. Others are specific steps that require maintenance every two years. And some generators need to be maintained in a range of two to one years.

對維修工具加以改進，對設備進行改造，提高檢修效率。焦化發電機是采用機械內混方式，定時地打開燃氣閥將可燃氣體噴入氣缸，使燃氣與空氣在缸內混合，進行燃燒。這樣通過增壓器、進氣管的氣體始終是不可燃的純空氣，避免了回火問題。

Improve maintenance tools and equipment to improve maintenance efficiency. Coking generator adopts mechanical internal mixing mode. Open the gas valve regularly to inject combustible gas into the cylinder, so that the gas and air are mixed in the cylinder for combustion. In this way, the gas passing through the supercharger and intake pipe is always non combustible pure air, avoiding the problem of backfire.

但是，由于爆燃現象時有發生，機組的活塞、氣缸、進排氣門、進排氣門座等故障頻繁，使用壽命降低，維護量相當大。為了安裝的方便、快捷，利用報廢的缸套加工了一個錐套(錐套的內外徑基本按照缸套的原有尺寸不變，僅僅在頂部加工一段錐面，并在錐面與內孔交界處倒一個大圓角，方便活塞環能順利壓入錐套。

However, due to the frequent occurrence of deflagration, the piston, cylinder, intake and exhaust valves, intake and exhaust valve seats and other faults of the unit are frequent, the service life is reduced, and the amount of maintenance is considerable. In order to install conveniently and quickly, a taper sleeve is processed using the scrapped cylinder liner (the inner and outer diameters of the taper sleeve are basically the same as the original dimensions of the cylinder liner, only a section of taper surface is processed at the top, and a large fillet is poured at the junction of the taper surface and the inner hole, so that the piston ring can be pressed into the taper sleeve smoothly.

在把活塞安裝到氣缸之前就把錐套套在活塞環處，使全部活塞環都處于正常使用時的壓縮狀態，安裝時僅僅需要先把活塞裙部放在氣缸內，然后稍作調整，使氣缸與錐套同心，再輕輕用手緩緩地將活塞推入到氣缸內。這樣不但降低了勞動強度，而且提高了安裝效率。

Before installing the piston to the cylinder, put the taper sleeve on the piston ring, so that all piston rings are in the compression state in normal use. During installation, just put the piston skirt in the cylinder, and then make a slight adjustment to make the cylinder and taper sleeve concentric, and then gently push the piston into the cylinder with your hands. This not only reduces the labor intensity, but also improves the installation efficiency.

確保焦化發電機運行在狀態怎么做？以上就是問題的相關解答了，您對此有一定的想法就來我們網站http://m.pyucoin.com分享交流一番。

What should we do to ensure that the coking generator is running in the state? The above is the answer to the question. If you have some ideas about it, please come to our website http://m.pyucoin.com Share and communicate.