1、我們在使用時候，先要注意燃氣發電機組機房應遠離明火區域；

1. When using, we should first pay attention to keeping the gas generator room away from open flames;

2、燃氣發電機組機房應寬敞、明亮且要求安裝換氣扇以保證良好的通風；

2. The gas generator room should be spacious, bright, and require the installation of ventilation fans to ensure good ventilation;

3、燃氣發電機組安裝時底盤與地基應用平墊鐵找平。接觸面積應在百分之60以上，且分布均勻；

3. During the installation of gas generator sets, the chassis and foundation should be leveled with flat iron pads. The contact area should be over 60% and evenly distributed;

4、燃氣發電機組機房內應符合消防要求，配備滅火器等消防器械；

4. The gas generator room should meet fire protection requirements and be equipped with fire extinguishers and other fire-fighting equipment;

5、室內安裝照明、開關、線路及其電器應采用防爆措施,且固定牢固；

5. Indoor installation of lighting, switches, circuits and their electrical appliances should adopt explosion-proof measures and be firmly fixed;

6、燃氣發電機組機房內安裝可燃氣體報警裝置，可燃氣體泄露時能及時發現；

6. Install combustible gas alarm devices in the gas generator room, which can detect combustible gas leaks in a timely manner;

7、60kw以下單臺燃氣發動機燃氣管路的外部主要管道內徑應不小于2吋，靠近發動機的部分內徑應不小于1吋。60kw以上燃氣發電機組則分別是3吋和兩吋。且須安裝燃氣閥門、型放水閥、防回火裝置，燃氣管路焊接完成應清理焊渣；

7. The inner diameter of the external main pipeline of the gas pipeline of a single gas engine below 60kW should not be less than 2 inches, and the inner diameter of the part near the engine should not be less than 1 inch. For gas generators above 60kW, they are 3 inches and 2 inches respectively. Gas valves, type drain valves, and anti backfire devices must be installed, and welding slag should be cleaned after welding the gas pipeline;

8、燃氣須脫硫、脫水、除塵，其中含流量≤0.25Nm3，氫氣≤百分之10。

8. Gas must undergo desulfurization, dehydration, and dust removal, with a flow rate of ≤ 0.25Nm3 and hydrogen gas content of ≤ 10%.

感謝您的閱讀，此文的文章來源：沼氣發電機組更多的內容和問題請點擊： http://m.pyucoin.com我們會繼續努力的為您提供服務，感謝您的支持！

Thank you for reading. The source of this article is biogas generator sets. For more information and questions, please click: http://m.pyucoin.com We will continue to work hard to provide you with services. Thank you for your support!